Installation instructions:

1. Ensure you have removed all former driver per the instructions found in the manual before attempting to install this latest driver version.
2. After downloading the file, unzip the file into an empty folder or directory on the hard drive. (If you cannot locate the file you downloaded, use the Windows Find command to search for the Torpedo_II_V2_Driver_V1.0.zip program on your hard disk.)
3. Connect the Torpedo II V2 to the computer, and select "\Win98" folder when the system ask for the driver. Restart your PC after driver installation completed. Your PC will automatically detect the Torpedo II V2 that is connected with provided USB cable and in power on. (This program will be found in the folder you unzipped the files to in step #1)

Windows ME / 2000 / XP has built-in driver support for "Torpedo II V2". So it is not necessary to install driver.

(Note: Connect "Torpedo II V2" to the computer to finish installing the built-in driver before installing the utility application, Application\setup.exe in the Torpedo_II_V2_Driver_V1.0.zip driver file.

Installation instructions:

1. Ensure you have removed all former driver per the instructions found in the manual before attempting to install this latest driver version.
2. After downloading the file, unzip the file into an empty folder or directory on the hard drive. (If you cannot locate the file you downloaded, use the Windows Find command to search for the TelBook.zip program on your hard disk.)
3. Please refer to the TelBook.exe & Backlight Operation Manual for details of the phone book tool. (This program will be found in the folder you unzipped the files to in step #1)

Caution: Please do not proceed the Bug Fix if your Torpedo II V2 MP3 player does not have below symptom. Otherwise, your player will be caused to malfunction.

Symptom - When you turn on your Torpedo II V2 MP3 player, it only shows "starting..." on LCD display and turn off automatically. User may try the following steps to fix the bug.

After downloading the file, unzip the file into an empty folder or directory on the hard drive. (If you cannot locate the file you downloaded, use the Windows Find command to search for the TPD_bugfix040914.zip program on your hard disk.)

Torpedo II V2 Bug Fix procedures:

1. Backup all your data in Torpedo II V2 mp3 to harddisk or other storage device. (Warning : All the data in Macer will be erased during firmware upgrade )
2. Use a full capacity AAA battery for firmware upgrade
3. Extract the firmware archive into a folder, you will get two files $norfla$.ugr and $nanfla$.ugr
4. Copy the file $norfla$.ugr to root directory of the Torpedo II V2 mp3.
5. Double click the right bottom icon "Safely remove hardware"and click the "Stop" button to stop Torpedo II V2 hardware device.
6. Remove the Torpedo II V2 from the PC. It will show "F/W upgrading".
7. After a while, the Torpedo II V2 will auto shut down
8. Re-plug the Torpedo II V2 into the PC again
9. Double-click the drive letter of Torpedo II V2.
10. Format the Torpedo II V2 in FAT (Do not format it in FAT32 or NTFS)
11. Copy the file $nanfla$.ugr to root directory of the Torpedo II V2 mp3.
12. Double click the right bottom icon "Safely remove hardware"and click the "Stop" button to stop Torpedo II V2 hardware device.
13. Remove the Torpedo II V2 from the PC. It will upgrade the firmware automatically.
14. After a while, it will show "OK", and restart the Torpedo II V2 again.